Did You Know? Some of the biggest questions people run into deal with the repairing their vehicles in New Jersey.
Many times people are confused and don’t know how to go about picking the right New Jersey auto body shop.
What process should I run through in picking the right vehicle repair shop? What questions should I consider?
What value am I getting for my Summit Auto Body Repair?
The most important question in determining what auto body repair shops is: What value am I getting in repairing my vehicle here?
Peotter’s Tire and Auto wants to head a warning that possibly, some body shops out there are looking for unsuspecting customers and ways to pad their bottom dollar.
A lot of times a Summit Auto Body shop will offer the lowest price because they know this will attract customers.
Unfortunately, from a customer standpoint choosing the lowest price is not always the way to go.
Daniel T., Vice President of National Auto Parts, in Dallas, Texas, concurs that doing this will only create more car issues in the future.
“Repairing your vehicle is always about what you get in return.
These days, New Jersey body shops continue to push the limits of their customers to see how much more they can get away with. At this point the body shop knows exactly what they’re doing. Is the customer to know the better?”
What can I do to protect myself?
A solution that’s been picking up a lot of traction recently is hiring a third party to assist you in this area.
There are a few good car crash consultants out there that will help you figure out what’s being put on your vehicle and how the vehicle’s being repaired.
Today's vehicles are made with many different types of fuel-saving materials like lightweight alloys and plastics. It is important for an auto body shop to be aware of the different materials and techniques used for repairing them.
Auto body shops and collision repair services refer to manuals for instructions repairing bumpers. The different material types require various finish materials, removal and installation procedures.
When a plastic bumper is cracked or has a small hole it can be repaired to look as good as new. Replacing the bumper is wasteful and it creates unnecessary debris for our landfills. A good, eco-friendly auto body shop will only recommend replacing the bumper if the damage is severe enough that repair time would be considered unreasonable and quality of results would be unsatisfactory.
The cost of repairing small abrasions, cracks and holes in plastic bumpers is often much cheaper than replacing the part. Of course, many collision repair technicians would rather replace the part and charge a fee for their labor plus mark-up on the price of the part because they lack in cosmetic repair skills and it is easier to warranty the work.
Working with Plastics
The first step to repairing plastic bumpers is to identify the material in order to choose the method of repair. Auto body shops use ISO codes on the parts to identify the various families of plastics. They cross-reference the codes with charts from the suppliers or by accessing reference materials on the internet.
It is important that the collision repair technician determine the type of plastic they are working with so they know the proper welding procedure to use to avoid damage to the part.
Some plastics can be welded with an airless welder or hot-air welder; others require a hot glue type of procedure. Tests must be performed and welding procedures have to be done correctly to avoid adhesion failure. Some bumpers will melt with a slight color change and they will remain tacky in the area where they have melted.
The bumper repair technician must identify the type of plastic they are working with in order to be successful with adhesive repairs. Failure to properly identify the plastic results in adhesion-related problems.
Some repair materials are based on flexible and rigid plastics. Using the wrong material can cause cracking when the part is flexed or it may not provide the correct strength for the repair area.
Cleaning and Prep
Proper cleaning and prep is critical for proper adhesion and finish. Whether the technician is repairing or replacing the bumper, the part will need to be cleaned. The bumper being repaired is likely to be dirty from the road; the new replacement part can have contamination on it from the manufacturing process.
Auto body repair professionals should use a low-VOC surface cleaner or a special plastics parts cleaner to help prevent solvents from going too deep into the plastic. If solvents are too harsh, they go deep into the plastic and cause adhesion problems after repairs are done.
This is an overview of the process of working with plastics. Time is money in the auto body industry; therefore, many collision repair technicians choose to replace rather than repair plastic bumpers and other parts.
Technology allows us to repair many items that are often replaced. As resources become scarce and landfills become over-full, we really should consider repairing rather than replacing when possible.
When looking for a good car crash consultant selecting one that gives you a lot of insight on the repair and product being used is imperative.
Using these specialists provides visibility in an area with many questions.
Another way is looking for a detailed report of the work being put into the vehicle and reviewing the warranty the shops offers.
When you get into an accident, every insurance gives you an assessment of the damages, take a look at the sheets and read over to see what product they’ve listed for use.
Auto Body Shops sporadically will attempt to use cheaper parts to make more money. Requesting the use of what’s listed on your insurance assessment is not unusual and will help protect against this.
In regards to warranties, most legitimate body shops will have an extensive warranty and stand by their work.
Where should I look for the body shop?
Driving to the nice plush auto body repair shops off the highway might be convenient, but doing this often drives up the price of the job. “All businesses have costs and are in it to make money.
With this assumption, you have to believe any cost a business incurs will be passed onto their consumer,” Daniel says.
Hanging off the highway, and looking more in-city gives any prospective client a better chance to keep labor costs low.
Prices per hour for labor can vary wildly from $30-$100 for the same type of work.
Don’t misunderstand the shop may not look the best, but you can be guaranteed going this route will provide good value.
Finding the Best Summit Auto Body is Just Around the Corner for those of You in New Jersey:
rev up your engines, today I'm gonna showyou how to spot a scam body shop before you get towed into one and it's too late,okay it happens to everyone eventually you get in an accident, then you have tohave your car towed to a body shop, the last thing you want is to be in anaccident be knocked around and then the tow truck guy comes and you let himdecide where to tow it, you want to know a good body shop beforehand, then writeit down and put it in your glove box so you'll have it at hand or put it on yourphone, because by law at least here in the United States you get in a wreck, youhave the right to pick wehatever body shop you want to fix your car, nobody canforce you to go to one place, but you have to understand, when the tow truckguys come, they generally get big kickbacks if they got a nice big wreckand they tow it to the body shop that they're affiliated with, they will getfive hundred a thousand maybe even more money for bringing that vehicle to thatbody shop, so you want to have one ready that you trust to say, no tow it here andif you don't know one, you still have the right to have it towed to your house, allthe insurance companies will tow it to your house then later they can tow it toa body shop, don't worry about that you just want to send it to a good job andnot just somebody who's being paid to ship your car off because they getkickbacks, so how do you find out if a body shop is a scam body shop or areally good one well you got to do a little researchhere, unless you live in Houston Texas then you can just ask me, who I use, I don'ttake any kickbacks I've sent many many customers to body shops and never took adime back from their repairs, I just want my customers to get their cars fixedcorrectly, I don't do bodywork so it's no skin off of my nose,and speaking of equipment you got to make sure that the body shop you pickhas a good paint booth, paint boots are giant areas that are completely sealed,so there's no dust they control the humidity for painting, it's veryimportant for getting body work done right, you don't want to have somebodypaint in your car that doesn't have a very good paint booth, try spray-paintingsomething outside, you're gonna see gets on it, hair everything, you got to have aplace that has a good paint booth and you have to have professional guysworking there who know how to blend paint and match it to the color of yourcar, because take a look at this, you can easily tell this bumper has been repaintedit's a completely different shade than the top of the car that wasn't painted, Imean look at that, you can see here's the one that's been repainted, it'scompletely a lighter color here it was not blended correctly, the paint doesn'teven match, so your visitor bodyshop say hey show me a car where youpainted part as a car, see if it matches and if it doesn't they're not any goodat blending paint, go someplace else and speaking of painting bumpers, check thisout this bumper was painted by a guy whodidn't even know what kind of paint to put on the car, realize that theseplastic bumpers are exactly that, they are plastic it requires a special kindof paint with a special bonding agent in order for it to stick, if you use regularcar paint that you put on the hood and put it on the bumper,guess what, it flakes off like this car did, whoever painted this bumper theyhad no notion about how to paint plastic bumpers, they shouldn't be in the bodybusiness and another big thing to check is the body shop area itself, if likethese cars all sitting all over the place they got tons of them looks likethey're busy, go back in a few weeks the same cars are sitting there, that's justa scam that guys use, I used to work for a guy like that years ago, he had all these junkcars and it would sucker people to come in and he wasn't fixing any of thosecars, you see all their stickers are out of date, some of them don't have licenseplates on them, don't go to a place like that cuz odds are, they're gonna takeforever to fix your car and may not even do a good job, because realize one thingbody shop work, it comes and it goes it's not a continuous thing, cars they breakdown all the time it's pretty continuous cars you're always breaking you got tofix them, but car wrecks they occur kind of randomly, so a lot of times these guysdon't have much business at all so if they're one of those guys thataren't that honest, they'll take your car in and say, oh it'll be ready in three days,another car comes in they're gonna make more money, they drop yours and then theyjust work on the car they're making more money, I've seen guys have cars and bodyshops for months for this reason, ask around, other people who theyuse and anybody who says that guy took forever to fix my car,don't go there, you find a guy like me I don't do bodywork, I do mechanical workbut my whole thing was, if people got here by 8:00 in the morning by 5:00 inthe afternoon most of the work I did on most of the cars were finished, I wantedto do stuff that we're in and out fast my customers were happy, they told peopleabout me, I never spent a nickel advertising because all my customerstold everyone about me, and of course you want a place that's been in business alot, but here's the kicker, you gotta do a little bit of research because I had aguy he was a great body man, but as he got older, he made a son take over theshop and his son had no interest in doing bodywork on cars really, so it'stime went on, I used the guy for a decade and a half, but then when a son took overI sent customers there they could bring the car over to me and I'd look at themand you could see scratches from the sandpaper that they didn't make smoothand paint it over so it had permanent scratches in it, you got to make surethat the person who's running to place cares about what his shop puts out andhere's where the Internet can really help you out a lot, because of peoplehave crappy bodywork done and it doesn't look right, they're gonna complain on theInternet, so if you do a research on the guy and you see, there's complaintsall over the place about this guy then you'd think, I'm not gonna go thereI'm gonna go somewhere else and although I'm always trying to save people moneyhere, don't go too cheap with bodywork you see those ads when I was a kid itused to be we'll paint any car for you know 59.
95 now it's like 200 or 300dollars, you're not gonna get a very good paint job of your car for that kind ofmoney these days, I had my old Celica done like five years ago at one ofthose places and you can see the paint's flat, it just doesn't hold up, to do agood paint job costs a lot of money to paint the entire car and speaking of agood shop a good shop handles all insuranceclaims, you don't do anything, if they say we want some money up front, you gosomeplace else, the good ones they all use insurance companies where they callit up, they handle all the paperwork if there's a problem they call up theinsurance company and say, look we just pulled off the bumper and found out thatthere's more damage underneath, then they can send a guy to look to make surethat's the truth, you don't have to get involved in the actual repair, and like anything you pretty much have to feel out the shop, as peoplein Texas have always said, you don't want a guy who's all hat and no cattle, or when Iwas younger in New York, hey you don't want the guy who's got the motorcyclejacket, but he doesn't have the motorcycle, there's plenty of good body shopsout there, you just have to find them, but since people are always getting in wrecks, heythat's your friends, see cars that were wrecks that they had fixed, look at it closelyand look at it in the Sun when the sun's shining, because the human eye we can seemillions of different varieties of colors, you can see hey wow that wasfixed really well or hey that doesn't match at all or there's paintthat's bubbled up or you look at the fender the guy replaced and parts ofthe gaps or half an inch and other parts are an inch and a half gap, you knowthat place does lousy work and don't go there and when you do find a good bodyshop hey, pass the word of mouth around go on the internet tell people, tell yourfriends about it, because if you find a good body shop, you tell other peopleabout it, they're going to continue to do good work, especially when they say, heyJoe sent me, they don't want Joe to get mad because if he's telling a bunch ofpeople how good they are and he does lousy work, they know they're gonnalose business and if they don't have to spend me advertising money like I neverspent, that's more money in their pocket and less money out of yours that's payingfor the body shop and the advertising, so take a tip for me and find a good bodyshop before you get in a wreck, because it's often too late then and you'll bestuck towed to some place where everybody's getting kickbacks fromeverybody else and the work is relatively shoddy,so if you never want to miss another one of my new car repair videos, remember toring that Bell!.
DIY How To Bondo Auto Body Repair (Tips and Tricks) To Prevent Common Problems with Body Filler
(upbeat music) - Hey, this is Donnie Smith.
Have you ever overground metal, making it too weak and too thin? Well it's not that hard to do with these thinner metals.
What about when working with body filler? Have you ever gotten it in cracks, gaps, other placesthat you don't want it? Takes quite a bit of time to get that out of there and clean it up.
So if you'd like to learn some tricks, how to prevent over-thinning your metal when working with thin metal, and how to keep fromgetting all the body filler in the places you don'twant it in the first place, then you're in luck, because that's what we'regonna show you in this video.
Alright, let's just goahead and get started.
What we're gonna do to eliminate grinding a lot of the metal off,is to use a DA Sander, and we can use 36 grit, or 80.
I'm using 80 here.
That usually works well.
May take just a little bit longer to remove the paint coatings, but you're not gonna chancegrinding too much metal off.
This does not take the amountof metal that grinding does.
Now with thinner metals,I would recommend this.
Now if you're working on older vehicles, grinding may be a little quicker, and that may still work fine.
Okay, now for the tip of how to eliminate getting body filler in places you don't want it, and that's simply to mask it off.
On the edge, I don't want the body filler wrapping around the edgewhere I have to clean it up, so I'm gonna mask that off.
Any gaps, for instance here, there's a, where the molding goes, I don't want body filler to wrap in there where I'm gonna have to sand it out, so I'm gonna use the bodylines that's on the car, and use that as a dividing line to make nice, sharp lines at, so that the body fillerdoes not get in these areas.
(upbeat music) Okay, now I'm mixing thebody filler up in the tube.
I'm gonna let the air out of the cap, so that it'll mix well.
And once I remove some of the air, I'll put the cap back on, and now I'm just gonnamix it inside the tube, because this hardener reallydoes separate a lot in there.
If you don't do this, you'll have liquid-ysubstance that comes out, and you don't want that, so be sure that you mixit up well in the tube before you use it.
Now I've already got somebody filler out here, and I used a paint stick toput some on this mixing board.
And I'm gonna get this hardener, I'm gonna apply a stripfrom edge of the body filler to the other, and that usually is a pretty good mixing ratio.
And notice I'm using a spreader to mix it.
I'm not using a paint stick to stir it, because that could put air bubbles in it.
If you get air bubblesin your body filler, that's gonna create pinholes, whenever you go to sanding body filler.
So it's always best towork the air bubbles out.
Just spread it out on your filler until it's nice and uniform.
You don't want there tobe any hardener streaks.
You wanna mix it until it's one color.
(upbeat music) Okay, now I have the filler mixed good.
It's nice, uniform, one color.
We don't have any hardener streaks in it, so we know that it's mixed well.
I'm gonna apply the body filler.
Now to do this, I'm gonnaapply a tight coat first, and what that is, iswhere I take a thin coat of body filler, and push really hard down on the spreader, so thatI push it into the metal.
That helps it adhere better to the metal, so that you don't have any problems with adhesion at a later point.
Now once I get the tight coat on, I come back with a fill coat, and that's where I'm gonnaput a little bit less pressure on the spreader, which allows it to fill the damaged area in.
(upbeat music) Okay I have the fill coat applied.
Now here's a tip for you to eliminate a lot of the sanding, and that is to work on your edges, because if you have real hard edges, it's gonna take more sanding.
So what I'm doing here, is I'm using the spreader, and on the edges I'm kind of feathering that body filler out, so that edge is a real thin layer, and you don't have that big, hard edge to try to sand out.
Okay, now let this setup for just a little bit, and you don't want to do it immediately after you apply the body filler.
You wanna let the filler set, but you don't want it to be dry either.
But as it's kind of in its green state, go ahead and pull the tape off.
This will leave you nice clean edges.
And also before it fully cures, you can block sand lightly, you don't wanna sand too hard, just to help level someof the highs and lows.
Okay, now I allow it to dry, and started block sanding it.
Now I'm starting out with 36 grit, because that's gonna levelthe filler really fast, but notice that I'mstaying within the filler.
My block is not slidingout onto the paint, because I don't want those deep scratches getting onto the paint surface.
I'm just wanting to level the filler.
(upbeat music) Also notice that I'm sandingin different directions.
I'm not just going at oneangle the entire time.
So I change it up.
And what sanding indifferent directions does, is it's gonna help youget a more level surface.
So always sand in different directions.
(upbeat music) (sanding) (upbeat music) Once you have it level, switch to 80 grit.
That's what I'm doing here.
First, I'm gonna apply some guide coat, and this just to helpidentify highs and lows, and you'll know whenever you get rid of the 36 grit scratches.
Makes it easier to see this way.
Now also notice I am sandingout on the paint a little bit.
I'm not going too far, but you do wanna sand out further than you did with your 36 grit.
You wanna make sure all 36 grit scratches are removed during this step.
(upbeat music) Okay I finished blocking, and I'm feeling for high areas.
And usually if you seemetal spot areas like this, that's gonna indicate that it is high.
And that happens sometimes, and if it does, what you need to do is get your pick hammer, and lightly tap down on those metal areas.
And what this is gonna do, is it's gonna lower that metal.
(upbeat music) And here's another tip for you.
If you're having problemsfilling the bodywork, and determining highs and lows with your hand, with your bare hand, use something like this, a wipe all, or a towel or somethingto put between the panel and your hand.
And this may help you be able to feel the highs andthe lows much better.
Now I'm gonna use the tape, because I'm gonna be applying some putty, so I'm gonna do the same thingI did with the body filler, the edges, and that indention where the body side molding goes.
I'm gonna tape all that off, to keep all the filler out of that.
Now when using putty, it lays out a littlethinner than body filler, so I usually just go halfway, rather than from one edgeof the filler to the other.
So I'm gonna do about halfthe amount of hardener.
(upbeat music) But everything else is basically the same.
Mix it until it's one uniform color.
Don't want any streaks in there.
And the good thing aboutputty is it's thinner, and it's easier to get a nice skim coat, but you do wanna do the tight coat, followed by a fill coat.
And another thing about a putty, is you can go over the entire repair area, from paint edge to paint edge, and that helps any imperfections you had in your sanding flaws, or sanding scratches,or anything like that, it's gonna fill in.
(upbeat music) And after allowing it tosetup for a few minutes, now I'm gonna peel the tape.
(upbeat music) Now when sanding finish putty, I'm not gonna start out with 36 grit.
I'm gonna start out withthe 80 to level it out.
And also I wanna let it fully dry.
I really don't wanna try to sand putty in its green state, so I'llallow it to dry all the way.
Then I'm gonna get 80 on a block, and I'm gonna sand it.
And I'm gonna cross sand it.
Make sure it's good and level.
(upbeat music) Once I have it leveled with 80, I'm gonna use the guide coat, and then I'm gonna comeback with 150 to 180.
I'm using 150 here I believe, but anywhere between 180and 150 will work fine for smoothing out your 80 grit scratches.
And this guide coat, it will help you identify any lows that you may have if there are any, or let you know whenever you got all the 80 grit scratches sanded out.
(upbeat music) And one last thing you wanna do, before you send it offto start priming it, you wanna make sure it fits.
Make sure everything aligns.
Make sure that your body work is right.
So you're gonna have toput it up to the car, and make sure everything works.
(upbeat music) Always, thanks for watching this video.
Be sure and share it with your friends.
Give us a thumbs up, a like, and be sure to subscribe to our channel.
Also be sure to go to CollisionBlast.
And there we have hours of free autobody and painttraining videos like this one, and a lot of other resources for you.
Thanks again for watching.
Have a safe and productive week, and we'll see you in the next video.